How To Remove Nails From Pallets

6 of the Easiest Means to Remove Pallet Wood

Terminal week I shared with yous the cold difficult facts about harvesting pallet wood. But, like you, I still like to utilise pallet woods from time to time. But make certain you've weighed the risks and the piece of work involved to harvest the pallet wood before you go started. Today I'yard going to prove you 6 of the Easiest Ways to Remove Pallet Wood. If you're upwardly for the challenge, allow'southward get started.

Pallet upcycling is all the rage today. But, if you've always tried to remove the planks from a pallet, yous know it's not an like shooting fish in a barrel task. Pallet nails are typically screw nails and are designed to grip that wood with violent strength. If that's not enough, there tin be 4-5 nails per joint. Sheesh, you'd call up pallets were built to concord a ten ton elephant. Well, actually, it is fabricated to agree tons of production every bit it is lifted by a fork lift. Which explains why harvesting pallet wood can be labor intensive.

To save you time, sweat, and a backache; hither are the quickest and easiest ways I've found to salvage beautiful rustic pallet wood.

Materials:

(I've included affiliate links for your convenience. I earn a small per centum from a buy using these links. At that place is no additional cost to you. You can read more about chapter links hither .)

• Circular Saw (or jig saw)
• 2 Pry bars
• Duckbill Deck Wrecker
• Hammer
• Oscillating Multi-tool (or hacksaw)
• Metallic Cutting Blade
• Reciprocating Saw

Terminology:

The planks that most people use from pallets are called deck boards. The thicker lumber that support the deck boards are called stringers.

Now that we have the terminology down, allow'southward go to the sabotage!

6 Techniques for Removing Pallet Wood

one. Round Saw Technique:

This is probably the quickest and simplest fashion to remove pallet deck boards. The drawback is your harvested boards are limited to the width between nails. For projects that merely require pocket-sized boards (minor caddies or signs) this is my preferred strategy for removing pallet wood.

1. Lay the pallet on a apartment surface.
2. Ready your circular saw blade depth about ane/four″ deeper than the deck lath.

3. Saw through the deck board shut to the nail line, but not likewise close that yous hazard accidentally hitting them. (Always await on both sides of your wood to make sure there are no hidden nails on the underside.)

four. Cut along the within of the other nail line.

2. Pry Bar and Hammer Technique:

Most homeowners have a pry bar and hammer in their tool box. This technique uses the most basic of hand tools to remove the pallet wood. The downside is it can take longer and might crave a little more of your free energy (and patience.)

1. Hammer a pry bar under the edge of i of the deck boards.
2. Pry upwards the edge a little.

3. Go out the start pry bar underneath the pried up side. Hammer a second pry bar under the deck board from the opposite side.

iv. Gently stone the two pry bars to lift the board free.

3. Oscillating Multi-Tool with Metal Blade Technique:

I of my desert island tools is my aquiver multi-tool. This little tool can make it tight spaces and fits in the palm of your hand. When fitted with a metal cut blade, an aquiver tool tin can cutting through metal nails neatly and efficiently.

The downside of this technique is the nails are left inside the stringer board. Otherwise, this is a overnice make clean technique for harvesting longer expanses of the deck boards.

1. Offset upwards the aquiver tool. Insert the blade between the stringer and the bottom of the deck board.
2. Guide the tool to cut through the nails. Equally yous are cutting, don't forcefulness or rock the tool.

(Depending on how wide your deck boards are, you may non be able to cut through the inner nails. In this case, utilize the pry bar technique higher up.)

four. Reciprocating Saw Technique:

Using a reciprocating saw is the quickest technique I've found for removing larger pieces of pallet wood. The downside is it can go out some damage to your woods and information technology leaves nails in the stringer boards.

1. Line up the reciprocating saw between the deck boards and the stringer.
2. Get-go the saw before plunging it into the wood.
3. Guide the blade to cut through the nails.

If you are aiming to employ the deck boards, bending your saw blade into the stringers. If y'all are planning on using the stringers, aim your blade into the deck boards. Ultimately, one or the other will sustain some cut marks as shown below.

v. Deck Wrecker Technique:

A deck wrecking pry bar can canvass through the woods removal process when taking apart a pallet. This upside of this technique is it ordinarily removes the nails or leaves them in place to be removed with a hammer. The downside of this technique is it tin can easily split your deck boards (especially if the pry bar has a short head.)

1. Starting on one side of a deck lath, straddle the stringer with the prongs of the deck wrecker.
2. Slip the prongs under the deck board.

3. While supporting the pallet with your foot (or body weight) rock the handle on the deck wrecker back and pop the deck board up.

4. Move your deck wrecker to the next stringer and repeat until the entire deck board is freed.

6. The Combination Technique:

I discover a combination of the higher up techniques works best for me. Personally, I adopt to first by cutting off the ends of the deck boards with the round saw. I finish up giving up about 4″ of the pallet plank length, but I'1000 okay with that (particularly if the deck boards are longer.) And so I pry upward the middle boards with two pry bars. If the deck boards come up up hands, I'm off to remove the nails. But, if they give me a hard time or it looks like the plank might divide I'll utilise the oscillating tool to cutting the nails.

Removing Nails from Pallet Deck Boards:

To remove nails yet in the deck board plow the lath upside down. Hammer on the point end of the nail until it protrudes through the other side.

Flip the board correct side up and use the claw on the hammer to pry up the nail.

Now that you have a listing of 6 of the Easiest Means to Remove Pallet Wood, are you going to try to harvest your own pallet wood?

Removing pallet forest is an fine art and everyone seems to develop their own technique. My Repurposed Life just posted a collection of 10 Videos showing various pallet deconstruction techniques, you lot'll want to lookout man some of those videos if you demand more caption on removing pallet boards or want to find other techniques for removing pallet woods.

Pin this picture to spare your friends from struggling to remove pallet woods:

At present that you lot harvested all that pallet forest, here are 71 Projects Y'all Can Make with Scrap Forest!

Source: https://www.prettyhandygirl.com/6-easiest-ways-remove-pallet-wood/

Posted by: christopherlettan72.blogspot.com

Share this post